English ENGLISH Espanol ESPAÑOL Chinese 中文

Thermal CTP plates DL200

Brief Introduction

DL200 is produced by advanced, no-bake thermal plate technology. It is produced with two layer coating which achieves long run length and it can be also fully used in ordinary ink and UV ink with good performance. When you change to use the DL200 double layer CTP plates, you have almost no need to adjust any parameter for machine setting due to its good compatibility.

 

Features

1.Long run length CTP plates

With the two layer coating technilogy, it can get long run length compared to the single layer CTP plates. The DL200 can have real test run length up to 150,000 copies.

2. No-bake Technology

DL200 uses a chemical-resistant second layer for long run performance without the need for post-baking. Which will provide more convenient for the operation and it can save time and increase the working efficiency.

3.UV ink resistance

By the advanced two layer production technology, the DL200 can not only has the long run length with ordinary ink printing, but also it can be used in UV ink printing with good run length up to 50,000 copies

4.Good compatibility and convenient operation

It can be used with most of the popular developers such as AGFA THD200, IMAF, Kodak Goldstar and etc, and wide latitidue provides convenient operation during processing the plates

Technical Specs
Plate characteristics
Plate type Postive-working, Thermal CTP plate
Substrate Electrochemically Graied and Anodized Lithorgraphic Aluminium
Alloy Standard 1060Alloy
Maximum Width 1560mm
Gauge Avaiable 0.15mm,0.30mm (0.20mm,0.25mm,0.40mm on required)
Special Sensitivity 800-850nm,peaks:830nm
Digital Energy 110-130mj/cm
Resolution 1-99% & 200 Ipi
Platesetter compatiblity Kodak Trendsetter, Heidelberg Suprasetter, Screen and other popular platesetter etc.
Run length 100,000 copies with ordinary ink, up to 30,000~50,000 copies in UV ink printing
Safelight Daylight working
Processing
Developer JRT developer,Kodak Goldstar Premium, Agfa, Imaf, Kruse and etc
Replenishment 80-100 ml/m2
Processor  All the popular thermal processor
Developing Condition Temperture:24-26°C/Time:20-35 Sec
   
Packing and Storage
Packing Packed in carton with waterproof/lightproof paper and backing
paper among the plates to protect them from scraping.
0.15mm,100sheets/pkt; 0.30mm,50sheets/pkt
Shelf Life 18 months,under recommended storage conditions
Storage conditions Temperature 10-26 °C RH between 40-70%.